Wire Cutting Cum Stripping Machine
Cutting Machines for Power Chords

 Cutting Machine for Heat Shrink Tubes

 High Speed Cutting & Stripping machine
 for Battery Cables RAE-SER-21
 High Speed Cutting & Stripping machine
 RAE-SER-1
 Automatic Cutting Machine for
 Corrugated Tubes
 
Consultancy To Overseas Manufacturers

 

 


 

 


 

Product Range :

Wire Cutting Machines
Stripping Machines

Wirewin Software
Other Activities
Micro Controllers

  Micro Processor Controls
 
Industrial Automation System
  Machinery For Wiring Harness

  


 



 















 


Cutting & Stripping Machine for Battery Cables RAE-SER-21

M/s ' Machine makers r.s. ' have developed and manufactured Cutting Stripping machine ( Model RAE - Ser 21 ) battery cables upto 50sq mm cross - section. it the cable to accurated length end also removes insulation from both ends.
 

Cutting & Stripping Machine for Battery CablesRAE-SER-21 used a specially developed feeding system. it takes care of heavy frictional force required for stripping cables.

this machine is tabletop, user-friendly, automatic. it used different sets of blades for various size of cables. All other setting is completely digital It is available with Microprocessor Controls as well as pc based Controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in- build production counter, which indicates the number of cuts taken

The RAE-SER-21 Machines can cut cables of Length from 125mm to 9meters it can strip up to 35mm form either side.
depending upon the length, the machine can process around 1200 wires per hour.
The machine works on single phase electric supply and 5 bar pneumatic supply.
Special machine for other specific customer needs can also be developed by m/s 'Machine Makers r.s.'

We are happy to forward our lowest offer for the ‘Fully Automatic Cutting & Stripping Machine for Battery Cables ’. As discussed, the proposed machine will be specially made to suit your battery cables of size upto 25 sq mm.

Some basic features of the machine will be as follows:
1) Wire length: 125 mm to 9 mtrs (in steps of 1 mm);
2) Insulation stripping: 5 to 35 mm (in steps of 0.1 mm);.
3) Machine will have cutting length tolerances as ±0.3 % (but minimum ±2 mm)
4) Tolerance on stripping length will be  ±0.5mm
5) The machine will be able to cut and strip at least 10 wires (of length 2m,
    strip length 12 mm each) per minute. (That is at least 600 wires per hour, or at
    least 7200 wires per 12 hours)

Fully Automatic Cutting & Stripping Machine for Battery Cables
We are happy to forward our lowest offer for the ‘Fully Automatic Cutting & Stripping Machine for Battery Cables ’. As discussed, the proposed machine will be specially made to suit your battery cables of size upto 25 sq mm.
Some basic features of the machine will be as follows:
1) Wire length: 125 mm to 9 mtrs (in steps of 1 mm);
2) Insulation stripping: 5 to 35 mm (in steps of 0.1 mm);.
3) Machine will have cutting length tolerances as ±0.3 % (but minimum ±2 mm)
4) Tolerance on stripping length will be ±0.5mm
The machine will be able to cut and strip at least 10 wires (of length 2m, strip length 12 mm each) per minute. (That is at least 600 wires per hour, or at least 7200 wires per 12 hours)

 
 

 | Home | Products | Enquiry |

 Designed & Hosted by : MID  Promoted by : GID